BDS raises the bar with 6" radius arm systems for the late model Super Duty.
Important Kit Notes
- 1. Diesel models only.
- 2. Due to taller factory ride height, Tremor models will not net full advertised lift height. The final right height will be the same as standard models.
These 6" systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength.
Full length 4" ProRide diesel-only specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy-duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6" of lift driveline adjustments are necessary so a precision-built transfer case indexing ring is supplied to improve the front driveline operating angle. Additionally, a high clearance transmission cross member is supplied. In the rear of these 6" lift systems, BDS offers your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity. Additionally, high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to complement the front setup for all-around impressive performance. Take your Super Duty to the next level with BDS Suspension.
- Tire & Wheel Combinations
- 38x13.50 w/17x9/18x9/20x9 and 4.5-5" backspacing
- 38x13.50 w/17x10/18x10 and 5" backspacing
- 38x13.50 w/20x10 and 5" backspacing
*Trimming may be required*
- Est. Installation: 6-8 hours
- Difficulty Level (easy 1 - 5 complicated): 4