Skip to content

ALPINE KTA-30MW Mono Tough Pack Amplifier with SBV-10-WRA 10in Water Resistant Subwoofer for 07-18 Jeep Wrangler Unlimited JK - BUNDLE-KTA-30MW-SBV-10-WRA

by ALPINE
Sold out
Original price $819.90 - Original price $819.90
Original price
$819.90
$819.90 - $819.90
Current price $819.90
SKU ALPI_BUNDLE-KTA-30MW-SBV-10-WRA

Description

Alpine has been making sound and entertainment systems for years, and over that time they've gotten a lot of feedback from Jeepers and went the extra length to accommodate their needs. Many take advantage of their Wrangler's offroad capability where some just like to put the top down. In either situation, your interior can be exposed to the elements. In an effort to accommodate you, the customer, Alpine has made the KTA-30MW Mono Tough Pack Amplifier waterproof with an IP66 rating that will easily protect it from any precipitation or standing water you might be driving through.

The Mono Tough Pack Mono Amp has a small footprint so can be conveniently mounted in the factory location with the factory hardware underneath the dash on the driver's side. Another notable feature Alpine takes pride in developing for their KTA-30MW amplifier is their proprietary DPP, or Dynamic Pulse Power, technology. This allows the amplifier to quickly increase the internal gain level when it's needed for louder and more abrupt audio signals. Once the amplifier recognizes the boost in signal the gain is raised effectively doubling the required amount of power.

Jeeps are not known for their factory stereo performance, and it can be hard to hear your tunes when driving with the top down. Take back the power with an Alpine 10" Water Resistant Subwoofer. This easy-to-install upgrade conveniently mounts under the passenger seat and out of the way. It is designed for use with the Alpine MRV-M500 Mono V-Power Digital Amplifier (sold separately). Unlike other aftermarket subwoofers, this Alpine unit is waterproof (IP66 rating), so you do not need to worry about damaging it in a rainstorm or on the trail. Alpine backs this sub with a 1 Year Limited Warranty.

Installation Note: The Alpine 10" Water Resistant Subwoofer is designed for use with factory carpet. If your Jeep does not have carpets, additional padding may be required.

Not Compatible with 2-Door Wranglers

 

Alpine KTA-30MW Mono Tough Pack Amplifier

Class: D

Dynamic Pulse Power (DPP) Equipped: Yes

Power: 600W DPP x 1 @ 2Ω, 14.4V, ≤1% THD+N

Root Mean Squared: 300W RMS x 1 @ 2Ω, 14.4V, ≤1% THD+N (CTA-2006-B compliant)

Signal to Noise (1W into 4Ω): >83dB

THD (ref. 1W into 4Ω): <0.1%

Frequency Response: 20-400kHz (+/- 1dB)

Waterproof Rating: IP66 rating

Inputs: Speaker/RCA inputs (selectable, High range=0.5-10V, Low range=0.2-4V)

Sound Control: LP filter - Off/LP, Fc = 50-400Hz @ -24dB/Oct. (variable); Input gain settings (variable); Bass EQ: 0 to +12dB, Fc = 50Hz (variable)

Chassis: Cast Aluminum

Alpine SBV-10-WRA 10in Water Resistant Subwoofer:

Speaker Size: 10 inch

Location: Under the passenger seat

Recommended Amplifier Size: For use with 500 Watt amps

Vehicle Specific: For use with 4 door Wrangler JKs only

Rated Waterproof: IP66 Rating

Peak Power: 1050 Watts

Root Mean Square (RMS): 350 Watts

Nominal Impedance: 2 Ohm

Frequency Response: 45-200Hz

Wiring Pigtail: OEM-grade Molex 2-pin connector

Specs

  • Size: 10"
  • Location: Front Seat
  • Shipping Weight: 24.9lb

Fitment

Jeep Wrangler Unlimited 4-Door (JK)
  • 2018 Jeep Wrangler Unlimited 4-Door (JK)
  • 2017 Jeep Wrangler Unlimited 4-Door (JK)
  • 2016 Jeep Wrangler Unlimited 4-Door (JK)
  • 2015 Jeep Wrangler Unlimited 4-Door (JK)
  • 2014 Jeep Wrangler Unlimited 4-Door (JK)
  • 2013 Jeep Wrangler Unlimited 4-Door (JK)
  • 2012 Jeep Wrangler Unlimited 4-Door (JK)
  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)
Be the first to review this product!
x