Skip to content

Old Man Emu Front Upper control Arms - UCA0001 UCA0004 UCA0005


ARB 4x4 Accessories is pleased to announce the addition of Old Man Emu Front Upper Control Arms for a range of popular Toyota applications to our suspension offering. When an IFS vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding an Old Man Emu upper control arm brings the alignment cams back into an acceptable range for both caster and camber.


u2022 Forged Ball Joint Housing
u2022 Forged Eyelets
u2022 Heavy Duty greasable Ball Joint
u2022 OME Ball joint protective cap
u2022 GIIRO bushings, free pivoting, grease-free and maintenance-free
u2022 Increased camber and caster for 2in lift
u2022 Mount provision for OE ABS wires
u2022 ARBu2019s Integrity powder coat finish
u2022 Boxed in pairs with foam inserts
u2022 Fitting instructions included
u2022 OME Branded outer sleeve
u2022 Tested and passed to meet VSB14 requirements

Wheel Alignment

Please note, after the fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires/wheels, fender clearance should be checked. An additional caster may be required if the tires/wheels do not clear. Wheel alignment information is included in the fitting instructions.
The OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).